The company guarantees that the Polyethylene Tank products will perform the function for which it is designed, namely holding potable water at ambient water temperatures for a period of more than 5 years from the date of purchase.

Our products are serviced warranted for a period of 1 year from the date purchased from any of our reseller (given our reseller will properly store the tanks).

To submit a warranty claim, please contact Fujipipes on +63 917 300 1110 or send an email to sales@fujipipes.com. We will provide a warranty claim form for completion. If requested, the purchaser must provide pictures and invoice to avail the warranty.

• The purchaser is responsible for all other costs arising out of a warranty claim, including the transport costs of the defective tank to Fujipipes factory in Silay, Negros Occidental or its installation, handling and storage of tank contents and the disposal of any replaced tank (if applicable).

 Should any Fujipipes manufactured PE water tank product fail to perform the function for which it was designed within the specified period of time, the company shall, at its discretion, either;

A. Repair or Replace the above ground water tank within the initial 1-year period
B. Repair or Replace accessories within specified warranty period installed on the tank

1. The original invoice must be kept as proof of purchase to validate the warranty. That warranty is not transferable.
2. Fujipipes may require the removal of the contents of any tank to allow inspection for repair or replacement. The cost of the removal and storage of contents (if necessary) will be borne by the purchaser.
3. To the extent permitted by law, Fujipipes’ liability is limited to these warranty terms and conditions, in particular the “Pro-rata Cost” of repair and/or replacement of the product, at Fujipipes’ option.
4. ‘Pro-rata’ means that Fujipipes’ obligations reduce in line with the time remaining under the warranty. For example if a warranty claim is made 5 months into a 1 year pro-rata warranty, Fujipipes’ obligation under these terms and conditions is limited to a total of half the cost of repair or replacement of the product, and the purchaser must pay for any additional amounts necessary to repair/replace the product in respect of which the claim is made.
5. This warranty shall be null and void if:
   a. The tank is used for the purpose of storing goods other than potable water
   b. The tank is not installed, maintained or used properly
   c. The tank or product has been subjected to abuse, misuse or any form of willful or accidental damage; or
   d. Damage is cause by means other than manufacturing defect or by means otherwise outside the control of Fujipipes, including natural disasters such as earthquakes, landslides and ozone depletion.
6. The warranty is void where any person has walked on or applied any load to the top of the tank.
7. The Retailer as well as the Purchaser is responsible to secure the tank upon purchase. Fujipipes accepts no responsibility for any damage caused by an unsecured tank.
8. Weathering, discoloration and or degradation of the product over long periods of time (due to climatic conditions) and the effects thereof as expected by current industry standards is not covered by this warranty.
9. Fujipipes accept no responsibilities for deformities caused by transportation (although minor deformities will not change the integrity and the structure of the tank).
10. The purchaser has made their own enquiries as to the fitness of the product for the purpose to which it is to be put. Fujipipes and the Retailer make no representations regarding fitness for a particular purpose or situation, but only the standard specification of the product sold. This warranty does not apply for the purchase installs or uses a tank or product for a purpose or in a situation for which it was not fit.
11. Central Negros Fujipipes Industries Inc. retains the ownership of all goods sold until full payment has been made by the purchaser.

SITE PREPARATION AND MAINTENANCE FOR A FUJIPIPES-MADE POLYETHYLENE TANK (TANQUE – PRIME TANK – TITANE)

1. Ensure the location of the tank is level stable ground which has uniform compaction ( free of soft spots). Do not locate the water tank close to retaining walls or embankments without first consulting a professional engineer to ensure ground is capable of supporting the weight of the full tank.
2. Ensure the surface of the site is free from sharp objects or stones.
3. Spread a layer (approx. 75-100mm) of METAL DUST (3mm) (bedding sand can be used but is prone to erosion) compacted evenly over the level ground. Place the tank directly on top of this material, the tank pad needs to be larger than the base of the tank. Alternatively, your tank can be sited in a reinforced concrete slab which must be 25MPA (approx. 75- 100mm thick with F72 mesh) this level, flat and larger than the base of the tank (consult a professional engineer for slab details)
4. Ensure the metal dust is contained under the tank at all times and cannot be washed away. This can be achieved by diverting all the run-off water away from the site and retaining
5. METAL DUST with some form of retaining structure e.g. (cement strip, rocks or sleepers etc.).
6. For stand applications, ensure the stand is designed to carry the weight of a full tank (consult an engineer).
7. Ensure the plumbing from the outlet is well supported ad cannot be knocked and a flexible coupling must be fitted otherwise the warranty may be voided. A flexible coupling is required directly after the tank outlet to ensure no strain is applied to the outlet and the walls.
8. Ensure all overflows are fitted correctly and plumbed away from the tank site to help reduce the possibility of site erosion.
9. Make sure to install breather or pressure relief valves. Explosion of tanks due to over pressure is a common mistake.
10. Polyethylene tanks will expand when filled. Allowance for this expansion is required when all plumbing work is carried out.
11. Polyethylene tanks requires maintenance checks for any site erosion and to clean leaves etc. from the tank roof, inlet and overflow screens at regular intervals.
12. Incorrect installation, handling and usage of Fujipipes made products other than in accordance with the instruction provided by Fujipipes will prevent a purchaser from making any claim under this warranty.

Receiver Name:                                                                                        

Signature:                                                                                                 

Retailer’s Name: ___________________________________

Retailer’s Representative: ___________________________

Date: